VF200 SHO
4.2L V6 332HO
REPOWER KIT
2022 to Current

USD $1,699.00

Yamaha updated the SHO V6 engines for 2022 and Nizpro have updated the 332 HO Performance Repower.

Meet the new Nizpro B Series SHO V6 332HO Performance Repower.

It's all about optimising performance.

The Nizpro Marine 332HO Performance Repower is an affordable, simple way of turning your VF200 SHO engine into a 332hp monster: improving hole shot, mid-range acceleration and top speed. And you will do all this while still using up to an average 20.2% less fuel than stock.

A Nizpro Performance Repower optimises the performance of your engine. It’s not about turning your boat into a rocket ship – that’s what we made Nizpro 450s Superchargers for!

Use the DIY Kit to easily repower your ECU! Upgrading to a Nizpro Marine Performance Repower, your Yamaha VF200 SHO will make 332hp with extra torque through the rev range to get your boat up and out of the water faster.

Increased Power, Improved Economy & Reliability? It’s all true!

Testing: We have rigorously tested the Nizpro Marine 332HO Performance Repower on a standard Yamaha VF200 SHO engine utilizing the Nizpro Marine Endurance Test on our inhouse dyno cell. The engine passed with no adverse effects*.

The same engine was also extensively water tested for 250+ hours to further validate the dyno results. These tests underpin the performance of the thousands of engines currently in market using the Nizpro Marine 332HO Performance Repower

*Performance Caveat: Engine must run on Minimum 89–90 MON USA grade / 95-98 RON AUS grade Octane fuel & have adhered to recommended Yamaha service intervals. 

Please note that all NIZPRO ECU Flashing Software is ONLY compatible with Windows Computers.

Suitable for

  • Yamaha VF200 SHO LB         2022  to Current
  • Yamaha VF200 SHO XB         2022  to Current

 

*Performance Caveat:

Engine must run on Minimum 89–90 MON USA grade / 95-98 RON AUS grade Octane fuel & have adhered to recommended Yamaha service intervals. 

STOCK YAMAHA VF200 SHO 2022 to current VS NIZPRO 332HO PERFORMANCE REPOWER
• Power increase to 332 hp
23.9% Torque increase to 348.8Ftlbs
• Nizpro 6200 or 7100rpm rev limiter – your choice
Up to an average 27% improved fuel economy over stock Yamaha

*Performance Caveat:

Engine must run on Minimum 89–90 MON USA grade / 95-98 RON AUS grade Octane fuel & have adhered to recommended Yamaha service intervals. 

DIY Kit includes

  • ECU Flash Interface & USB Cable
  • AC Flash Power Supply – Region Specific
  • 12V DC Power Cable
  • SHO V6 Flash Harness
  • 2 x 332HO Nizpro Decals
  • 1 x 332HO Performance Repower
  • Nizpro Cap
  • Nizpro USB preloaded with Instructions

NIZPRO – Yamaha 4.2L V6 SHO B Series 2022+ ECU Flashing Instructions

 

*Performance Caveat: Engine must run on Minimum 89–90 MON USA grade / 95-98 RON AUS grade Octane fuel & have adhered to recommended Yamaha service intervals.