VF250 SHO 4.2L V6
332HO DIY KIT
2022 to Current

USD $1,699.00

Go Further, Go Faster, with Nizpro.

Optimize Speed, Maximize Power, and achieve Peak Efficiency.

Unleash the full potential of your Yamaha VF200 with the Nizpro Marine 332HO Performance Repower. This innovative upgrade boosts power while also reducing fuel consumption, delivering the performance you need without compromising engine efficiency. Theย Nizpro Marine 332HO Repower is the ideal, cost-effective performance enhancement for your Yamaha VF 200 SHO V6 4.2L engine. Whether you're cruising through the waves or going flat out, this upgrade provides the perfect balance of power, fuel economy, and reliability.

A Nizpro Performance Repower optimises the performance of your engine. It’s not about turning your boat into a rocket ship – that’s what we made Nizpro Superchargers for!

Use the DIY Kit to easily repower your ECU! Upgrading to a Nizpro Marine Performance Repower, your Yamaha VF250 SHO will make 332hp with extra torque through the rev range to get your boat up and out of the water faster.

Increased Power, Improved Economy & Reliability? It’s all true!

Testing: We have rigorously tested the Nizpro Marine 332HO Performance Repower on a standard Yamaha VF250 SHO engine utilizing the Nizpro Marine Endurance Test on our inhouse dyno cell. The engine passed with no adverse effects*.

The same engine was also extensively water tested for 250+ hours to further validate the dyno results. These tests underpin the performance of the thousands of engines currently in market using the Nizpro Marine 332HO Performance Repower

*Performance Caveat:

Engine must use Minimum 89 AKI US gas/95 RON AUS Octane fuel & must have adhered to recommended Yamaha service intervals.ย 

Please note that all NIZPRO ECU Flashing Software is ONLY compatible with Windows Computers.

Suitable for

  • Yamaha VF250 SHO LBย  ย  ย  ย  ย 2022ย  to Current
  • Yamaha VF250 SHO XBย  ย  ย  ย  ย 2022ย  to Current

 

*Performance Caveat:

Engine must use Minimum 89 AKI US gas /95 RON AUS Octane fuel & must have adhered to recommended Yamaha service intervals.ย 

STOCK YAMAHA VF250 SHO 2022 to current VS NIZPRO 332HO PERFORMANCE REPOWER
โ€ข Power increase to 332 hp
โ€ข 11.3% Torque increase to 348.8Ftlbs
โ€ข Nizpro 6200 or 7100rpm rev limiter – your choice
โ€ข Up to an average 20.22% improved fuel economy over stock Yamaha

 

*Performance Caveat:

Engine must use Minimum 89 AKI US gas/95 RON AUS Octane fuel & must have adhered to recommended Yamaha service intervals.ย 

 

DIY Kit includes

  • ECU Flash Interface & USB Cable
  • AC Flash Power Supply – Region Specific
  • 12V DC Power Cable
  • SHO V6 Flash Harness
  • 2 x 332HO Nizpro Decals
  • 1 x 332HO Performance Repower
  • Nizpro Cap
  • Nizpro USB preloaded with Instructions

NIZPRO – Yamaha 4.2L V6 SHO B Series 2022+ ECU Flashing Instructions

 

*Performance Caveat:

Engine must run on Minimum 89 AKI US gas/95 RON AUS Octane fuelย & have adhered to recommended Yamaha service intervals.ย 

 

I bought a new to me 2010 Bennington 2250 RCW with a Yamaha 200 SHO in 2022 with 238 hours on it.

I have seen different posts about NizPro tunes for Yamaha V6 SHO engines and realized that my 200 could be tuned to 332 HP for less than a grand.

I contacted NizPro in Australia and they recommended Sage Wiley of Fathom Marine – they said he’s the man for doing the engine flash on pontoons and tritoons. Sage included his advice on getting the boat properly propped after the flash.

His extensive experience with Yamaha – both sales and service, and “toon” knowledge was a huge benefit assisting my prop selection to optimize the results.

I’m very pleased with the process, results and working with Sage.

I also had my engine oil analyzed after 20 hours of use after the flash and received an absolute clean bill of health on the state of the motor, which is really good peace of mind!

I would recommend him to anybody considering performance enhancements to your boat/pontoon!

Joe, Mย  ย  Deep Creek Lake, Maryland